|
|||||||
|
|
|
|||||
|
|
|||||||
Parts list for the Long Gun
1@ solenoid sprinkler valve with
1" threaded inlet and outlet
1@ 1" X 3" steel pipe nipple
1@ air guage: 0 to 160 psi. or more. The smaller the guage the
better.
1@ shrader valve with 1/8 npt. threads
on one end
1@ 2" slip fit X 1" female threaded pvc bushing
2@4" X 2" slip fit pvc bushing
2@4" male threaded pvc adapters
2@ 4" female threaded pvc adapters
1@ 4" sch. #40 pvc pipe: length=how long you want to make
your gun
1@ 2" male threaded adapter *optional
1@ 2" female threaded adapters *optional
Parts list for the barrel of the Long Gun
1@ 2" pvc sch.# 40 pvc pipe: = long as nessasery to fit
inside gun
1@ 2" PRESSUER coupling
1@ 2" piece of pvc pipe about 3" long
1@ 1/4" X 2 3/8" long steel bar
1@ 2" pvc pipe to make barrel extention *optional
Parts list to make piston
1@ 3" pvc pipe coupler
2@ 3" pvc pipe about 1 1/2" long
2@ piece of thin steel disk that will just fit inside 3"
coupler
2@ flat sink stoppers to make stopper/seal on end of barrel.
1@ 5/16" bolt with nut and washers
Other things needed to make this gun
1@ pvc glue and primer/cleaner.
1@ tube sillicone, I recommend Ultra Copper auto motive sillicone
or equivalnt.
1@ quality glue to glue rubber stopper to piston.
1@ role teflon tape for steel pipe nipple.
1@ tools to cut pvc pipe square on the ends.
1@ tools to grind beval on OD. ends of pvc pipe.
1@ tools to remove stopping sholder inside 4" X 2" pvc
adapter
1@ * optional : required parts and tools to make electrical
system
1@ * optional : required tools and parts to build handels or
stand
1@ new one side razer blade
